V-Maxx Height Adjustable Coilover Kit for the VW Caddy MK3 & Mk4
We have worked with the Dutch suspension company now for many years and have experienced great success with their high-quality Coilover Kits. Extensive testing and the TÜV approval give both customer and us the peace-of-mind when installing the components.
These height adjustable coilovers offer a wide range of adjustment from 50mm drop to a staggering 90mm for the ultimate stance look. This level of adjustment is certainly what makes V-Maxx stand out from the rest. Coming with threaded adjusters on the front and rear setup, the included C-spanner makes altering your ride height a quick and simple process.
This TÜV approved coilover kit is designed specifically for the VW Caddy & Maxi.
All V-Maxx products come with a 2 Year Warranty as standard providing the components are fitted correctly and used as the manufacturer intended.
Here's what the manufacturer has to say
With on-vehicle ride height adjustment and factory-set damping, the ride height can be easily adjusted allowing you to achieve the ultimate stance. Damping is pre-set by V-Maxx to give the best balance between sporty handling and ride comfort for fast-road driving.
All kits are produced to the highest quality standards with sporty but comfortable spring and damping characteristics for both daily and sporty use.
VW Caddy Mk3 2004 - 2015 Models
VW Caddy Mk4 2015 Models Onwards
VW Caddy Maxi Mk3 2004 - 2015 Models
VW Caddy Maxi Mk4 2015 -2021 Models
Please Note - There are several different kits available for different models of Caddy/Maxi. We offer kits to suit 50mm & 55mm diametre struts. Strut diametre can be determined by simple cutting a 55mm wide notch from a piece of card. If this fits snugly over your strut, it's 55mm. If you have room either side, you have a 50mm strut. Simple. This can all be done on the ground. Simply apply full-lock and reach your hand over the wheel and check.
We also offer kits suitable for the Maxi models. These kits use longer rear shackle bolts to accommodate the thicker leaf springs. Please be aware of this before order.
Fitment Critera for VA5853
CADDY LIFE Ø55MM CLAMPING STEERING KNUCKLE FRONT / EXCL. 1.6TDI / 4MOTION / XENON / UP TO 1105KG. AXLE LOAD FRONT / NOTE! ONLY FOR MODELS WITH DOUBLE LEAFSPRINGS REAR / KIT CONTAINS LEAF-SPRING ADJUSTERS FOR LOWERING THE REAR / FOR GOCA M1 VOERTUIGEN / VOITURES / VEHICLES ONLY
Please carefully select the kit to suit your spec from the drop-down menu below.
1x V-Maxx X-Street Coilover Kit for the VW Caddy Mk3/Mk4
Free Fitting Service
Vanstyle are very pleased to be able to offer a completely free fitting service to all of our customers. Simply contact our sales team on 01623 797 358. Please Note - We are unable to fit this specific kit to any 4Motion vehicles.
Worth Bearing in Mind
When having new or up-rated suspension fitted, it's advisable to replace such things like the rear coil spring mounting cups as these can sometimes be worn. When uprating your suspension, using old worn parts can sometimes cause vibration or knocking from the worn components so we always advise to replace these parts at the same time.
After any adjustment to a vehicle’s ride height it is recommend the vehicle’s geometry is checked and re-aligned using suitable equipment. Failure to do can result in excessive and uneven tyre wear and in extreme cases even affect the vehicles handling. Please note Vanstyle do not offer an alignment/geometry service and alignment is NOT included within the Free Fitting Service.
All specified lowering rates may vary approx. +/- 10 mm depending on vehicle standard specification, options, tolerances & age.
Pricing: £374.99 ex Vat
Total: £449.99 inc Vat